Toro Workman UTX - Removing Debris from the Cooling System

RemovingDebrisfromthe
CoolingSystem
ServiceInterval:Beforeeachuseordaily—Remove
debrisfromtheengineareaand
radiator.
1.Parkthemachineonalevelsurface.
2.ShiftthetransmissionlevertotheP(PARK)
position.
3.Shutofftheengineandremovethekey.
4.Cleantheengineareathoroughlyofalldebris.
5.Removethe7screwssecuringthegrilland
removethegrill(Figure109).
g365212
Figure109
1.Screw2.Grill
6.Cleantheradiatorassemblyusingcompressed
air.
Note:Blowdebrisawayfromtheradiator.
7.Installthegrillusingthepreviouslyremoved7
screws(Figure109).
99