Making
Recording(OTR)
One-Toucfi Recording (OTR) allowsyou to add recording
time in 30-minute increments up to 4 hours at the touch of
a button.
Insert the disc.
Use tile dlannel V/A button or number
buttons to select the channel to record.
• CATV channel: 1 to 125
• TV channel: 2 to 69
Start Recording.
Follow tile instructions on page 62 to Ix'gin record-
ing.
Activate OTR.
While in Record mode, press the RE(] button again
to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder-VCR will record
for exactly 30 minutes.
4
Add Recording Time.
Continue pressing REC to add recording time in 30
minute increments up to 4 fiour_;.
• Tile D\rD Rccorder-VCR stops recording automat-
ically when tile time has elapsed.
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check tile date and time are correct.
Make sure the (]lock has been set (Setup - System Setting)
before, you proceed with a timer recording.
1
Press the MENU button.
• Press tile • • buttons to select Timer Rec and
then press tile ENTER or Ib- button.
• Select VCR Plus+ Record
• If the current time is not set. Set the current time first.
Enter VCR Plus+ Code number.
iiii!#iii,
_i',i!;;?¸
English -
To Next Page
Loading...
