Toshiba e-studio2809a - Page 137

5.SCAN FUNCTIONS
Setting up Scan Options 135
5 SCAN FUNCTIONS
5)
Shows the version information of the scanner driver.
6)
Shows the Help information about this scanner driver.
7) [Close]
Quits the scanning operation.
8) [Pre-Scan]
Pre-scans the original.
9) [Scan]
Scans the original.
10)Measurement unit
Select [Inch], [mm], or [Pixel] to change the measurement unit.
11)
Opens the advanced scan dialog.
 P.135 “Advanced scan dialog”
 Advanced scan dialog
You can click the triangle that faces right on the right-hand side of the basic scan dialog box to make scanning
settings. The default settings are underlined.
1) Resolution
Sets the horizontal and vertical resolution as dots per inch: 150 x 150 dpi, 200 x 200 dpi, 300 x 300 dpi
,
400 x 400 dpi, or 600 x 600 dpi.
2) Original Mode
Sets the original mode to fit the original image such as text only or the mixture of text and photos: Text
,
Text/Photo, Gray, or Color.
3) Original Size
Sets the original document size or the scanning area.
Select the original size from the pull-down list.
The displayed items differ depending on the installed options and destinations.
1
2
3
5
7
6
8
4