3.PRINT FUNCTIONS (Windows)
Setting up Print Options 91
3 PRINT FUNCTIONS (Windows)
[Finishing] tab
The [Finishing] tab allows you to enable sort printing and N-up printing.
1) Copy Handling
Sets how to sort the printed sheets when numerous copies are made for printing.
- Sort Copies
— Select this for sort-printing (1, 2, 3... 1, 2, 3...).
- Group Copies — Select this for group-printing (1, 1, 1... 2, 2, 2... 3, 3, 3...).
- Rotated Sort Copies— Select this for rotate sort-printing.
[Group Copies] and [Rotated Sort Copies] can be selected only when more than 1 copy is entered at
the [Number of Copies] option.
For rotated sort copies, you need to load paper of the same size in two paper sources (a drawer and
the bypass tray) in advance, placing one in a landscape direction and another in a portrait direction.
The paper size should be Letter, A4, B5, or 16K.
For the detailed instructions on how to print with the [Copy Handling] setting, see the following page:
P.106 “Sort printing”
2) 2-Sided Printing
This sets printing on both sides of paper. Select this check box and then the position of the margin for 2-
sided printing.
To Next Page
Loading...
