How to fix NIC access error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'NIC access error', turn the power OFF and then back ON. Perform the job in error again. If the error still occurs, contact your service representative.
How to fix system management module access abnormality on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'System management module access abnormality', turn the power OFF and then back ON. Perform the job in error again. If the recovery is still not completed, contact your service representative.
General| Print Speed (Black) | 35 ppm |
|---|---|
| Max Print Resolution | 2400 x 600 dpi |
| Max Copy Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Original Size | A3 |
| Duplex Printing | Yes |
| Functions | Copier, Printer, Scanner |
| Copy Speed | 35 ppm |
| Scan Resolution | 600 dpi |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac |
To Next Page
