Toshiba e-STUDIO3511 - Input Check (Test Mode 03)

November 2003 © TOSHIBA TEC 2 - 23 e-STUDIO3511/4511 ERROR CODE AND SELF-DIA GNOSTIC MODE
2.2.1 Input check (Test mode 03)
The status of each input signal can be checked by pressing the [FAX] button, [COPY] button
and the digital keys in the test mode (03).
<Operation procedure>
Note:
Initialization is performed before the equipment enters the test mode.
[Example of display during input check]
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
[0][3]
[POWER]
[POWER]OFF/ON
(Exit)
[START]
[FAX]
or
[COPY]
[Digital keys] (LCD ON)
[CLEAR]