Toshiba e-STUDIO3511 - Description of Blinking Symbols

e-STUDIO3511/4511 ADJUSTMENT 3 - 52 November 2003 © TOSHIBA TEC
3.10 Adjustment of the Paper Feeding System
3.10.1 Sheet sideways deviation caused by paper feeding
<Procedure>
• The center of the printed image shifts to the
front side. → Move the guide to the front side
(Arrow (A) direction in the lower figure).
• The center of the printed image shifts to the
rear side. → Move the guide to the rear side
(Arrow (B) direction in the lower figure).
• Bypass feeding • Drawer feeding
Feeding
direction
Center
[Front] [Front]
Feeding
direction
Center
(A) (B)
Fig. 3-1001
Fig. 3-1002
Fig. 3-1003
Fig. 3-1004
05/07
(A)
(B)