November 2003 © TOSHIBA TEC 3 - 25 e-STUDIO3511/4511 ADJUSTMENT
Text/Photo
590-0
590-1
590-2
3.5.4 Gamma balance adjustment
The density adjustment at the Black Mode is performed by selecting its density area from the
following: low density, medium density and high density.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
Note:
Be sure that this adjustment be made after performing “3.5.1 Automatic gamma adjustment”.
<Procedure>
Procedure is same as that of “3.5.3 Color balance adjustment”.
Color
mode
Black
Original mode
Remarks
The larger the value is, the density
of the item to be adjusted becomes
darker.
Acceptable values: 0 to 255.
(Default: 128)
Item to be
adjusted
Low density
Medium density
High density
Tex t
591-0
591-1
591-2
Photo
592-0
592-1
592-2
<Adjustment Mode (05)>
To Next Page
Loading...
