Toshiba e-STUDIO3511 - Output Check (Test Mode 03)

e-STUDIO3511/4511 ERROR CODE AND SELF-DIA GNOSTIC MODE 2 - 28 November 2003 © TOSHIBA TEC
2.2.2 Output check (test mode 03)
Status of the output signals can be checked by entering the following codes in the test mode 03.
<Operation procedure>
Procedure 1
Procedure 2
Procedure 3
Procedure 4
[0][3]
[POWER]
[POWER]OFF/ON
(Exit)
[START]
[START]
(Code)
Operation
ON
Stop
code
Operation
OFF
()()()
[0][3]
[POWER]
[POWER]OFF/ON
(Exit)
[START]
(Code)
Operation
One direction
()()
[CLEAR]
Test mode
standby
[0][3]
[POWER]
[POWER]
OFF/ON
(Exit)
[START]
[START]
(Code)
Operation
OFF
()
()
Operation
ON
()
[CLEAR]
Test mode
standby
[0][3]
[POWER]
[POWER]OFF
[START]
(Code)