November 2003 © TOSHIBA TEC 1 - 1 e-STUDIO3511/4511 SPECIFICATIONS
1. SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1.1 Specifications
Values in [ ] are for e-STUDIO4511 in case that the specification is different between e-STUDIO3511
and e-STUDIO4511.
• Copy process Indirect electrophotographic process (dry)
• Type Desktop type (Console type: when optional Paper Feed Pedestal (PFP) or
optional Large Capacity Feeder (LCF) is installed.)
• Original table Fixed type (the left rear corner used as guide to place originals)
• Accepted originals Sheet, book and 3-dimentional object
For single-sided originals – 50-127 g/m
2
(13-34 lb. Bond)
For double-sided originals – 50-105 g/m
2
(13-28 lb. Bond)
None of the carbon, bonded nor stapled sheet original is acceptable when
using the optional Reversing Automatic Document Feeder.
Maximum size: A3/LD
• Copy speed (Copies/min.)
e-STUDIO3511
*
“–” means “Not acceptable”.
*
The copy speed in the above table are available when originals are manually placed for single side,
continuous copying.
*
When the Reversing Automatic Document Feeder is used, the copy speed of 35[45] sheets per
minute is only available under the following conditions:
• Original/Mode: Single-sided original/A4/LT size. APS/automatic density are not selected. /Plain
paper.
• Number of sheets: 35[45] or more at the black mode and 11 or more at the color mode.
• Reproduction ratio: 100%
*
The values in ( ) are available when printed at color mode.
e-STUDIO4511
Paper supply
Paper size
A4, LT, B5
A4-R, B5-R,
A5-R, LT-R, ST-R
B4, LG
A3, LD
Drawer
35 (11)
28 ( 5 )
24 ( 5 )
21 ( 5 )
Bypass feed
(Size specified)
35 (11)
28 ( 5 )
24 ( 5 )
21 ( 5 )
PFP
35 (11)
28 ( 5 )
24 ( 5 )
21 ( 5 )
LCF
35 (11)
–
–
–
Paper supply
Paper size
A4, LT, B5
A4-R, B5-R,
A5-R, LT-R, ST-R
B4, LG
A3, LD
Drawer
45 (11)
32 ( 5 )
26 ( 5 )
22 ( 5 )
Bypass feed
(Size specified)
45 (11)
32 ( 5 )
26 ( 5 )
22 ( 5 )
PFP
45 (11)
32 ( 5 )
26 ( 5 )
22 ( 5 )
LCF
45 (11)
–
–
–
To Next Page
Loading...
