November 2003 © TOSHIBA TEC 4 - 25 e-STUDIO3511/4511 PREVENTIVE MAINTENANCE
4.8 Precautions for Storing and Handling Supplies
4.8.1 Precautions for storing TOSHIBA supplies
A. Toner/Developer
Toner and developer should be stored in a place where the ambient temperature is between
10°C to 35°C (no condensation), and should also be protected against direct sunlight during
transportation.
B. Photoconductive drum
Like the toner and developer, photoconductive drum should be stored in a dark place where the
ambient temperature is between 10°C to 35°C (no condensation). Be sure to avoid places where
drums may be subjected to high humidity, chemicals and/or their fumes.
C. Drum cleaning blade / Transfer belt cleaning blade
This item should be stored in a flat place where the ambient temperature is between 10°C to 35°C,
and should also be protected against high humidity, chemicals and/or their fumes.
D. Transfer belt / Transfer roller / Fuser belt / Pressure roller
Avoid places where the rollers may be subjected to high humidity, chemicals and/or their fumes.
E. Oil roller / Cleaning roller
Avoid places where the rollers may be subjected to high humidity, chemicals and/or their fumes.
They should also be stored “horizontally” on a flat surface.
F. Paper
Avoid storing copy paper in places where it may be subjected to high humidity.
After a package is opened, be sure to place and store it in a storage bag.
To Next Page
Loading...
