November 2003 © TOSHIBA TEC 3 - 77 e-STUDIO3511/4511 ADJUSTMENT
3.13.6 Adjustment of the upper tray angle
(1) Remove the front cover.
Fig. 3-1316
Fig. 3-1317
(2) Loosen the screw denoted with the arrow.
Fig. 3-1318
(3) The tension becomes loose.
While pushing the bracket down, hold the tray
and move it up or down, to adjust the angle
so that the tray becomes parallel by a visual
check.
To Next Page
Loading...
