e-STUDIO520/523/600/603/720/723/850/853 © 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
6 - 16
(8) “Update Completed.” is displayed at the bottom of the LCD screen after the updating is com-
pleted properly.
When the FROM basic section software version to be updated is "V1.03 / 8.30" or earlier:
Fig. 6-16
When the FROM basic section software version to be updated is "V1.04 / 2.38" or later:
Fig. 6-17
“Update Failed.” is displayed at the bottom of the LCD screen when the updating is not com-
pleted properly. “Failed” appears next to the failed item on the status display.
• Is the download jig connected properly?
• Is the updating data written to the download jig properly?
• Do the download jig and the equipment operate properly?
06/09
To Next Page
Loading...
