e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-13
3. Printer-specific Adjustments
* This adjustment will have an effect only on Auto or Color mode printing.
(3) Select [05 ADJUSTMENT MODE]. Change the values for codes [8042 to 8065] or [8268 to 8275] to adjust
the color density.
• Adjust the value for [05] code corresponding to the print option to be applied (PDL and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image Quality
Type = General, Halftone = Auto
> Text area, Graphic and image area
Change the values of “Smooth” for Y: 05-8058, M: 05-8059, C: 05-0860 and K: 05-8061.
• When printing on Macintosh is performed with the following option selected: Image Type =
Photograph, Halftone = Smooth
> Change the values for Y: 05-8050, M: 05-8051, C: 05-8052 and K: 05-8053.
* Printing on Macintosh is performed in PostScript. (See the “PS3” row in the table below.)
To Next Page
Loading...
