e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-75
3. Printer-specific Adjustments
<Note> • This adjustment changes the values set in the MFP. Therefore, it will affect every user who
uses the printer by connecting it to the MFP. After the adjustment, the values changed will be
applied to all printouts for the "Halftone" option. (For instance, if the value for [05] code for PCL
and Detail is changed, it will be applied to printing performed with PCL6 and Halftone = "Detail"
(or "Auto") selected.) Carefully perform the adjustment, being aware that the image quality of all
future printouts will be changed, when printing out originals other than the one that is used for the
adjustment.
• When "Mono" is selected from among the "Color" options and "Auto" (default) is selected from
among the "Halftone" options, "Detail" of the "Halftone" options is applied to text and graphics
(illustrations), and "Smooth" is applied to raster data (images). Therefore, particular attention is
required since the adjustment may have a different impact according to the patterns of the image to
be printed.
To Next Page
Loading...
