e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-109
3. Printer-specific Adjustments
For Macintosh
Open the print dialog box. Select "Twin color (Black & ***)" from among the "Color Type" options.
After selecting these options, print and check the print image quality.
If further image quality adjustments are still necessary, the service technician must use the next procedure
according to the image quality problem the user has.
• To obtain a shaper or softer print image: Go to procedure (2).
• To make only the light-colored area darker: Go to procedure (3).
To Next Page
Loading...
