e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-110
3. Printer-specific Adjustments
(2) Change the "Color balance" option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab. Change the option
in the "Color Balance" tab.
* Set the value, while checking the printouts until the optimum value is obtained.
- "Color Balance" tab: Change the "All Colors" or "Each Color" option.
- To make detailed setting, you can set it by marking "Detail" checkbox. (Same as Auto color or Full color
mode)
To Next Page
Loading...
