Toshiba E-STUDIO5506AC - Page 247

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-111
3. Printer-specific Adjustments
(3) Select [05 ADJUSTMENT MODE]. Change the values for codes [8023 to 8041] to adjust the color density.
- Adjust the value for the [05] code corresponding to the print option to be applied (color selected in the
“Twin Color” option).
Ex.: When printing is performed with the following options selected: “Color” option = “Twin Color”,
“Details” option = “Red”
Adjust the values for the following [05] codes: [8033] for Y (Yellow), [8034] for M (Magenta) and
[8023] for K (Black)
Selected
color
Halftone
[05]
code
Sub
code
Recommended
value
Acceptable
value
range
Default
Red
Y(Yellow)
05-8033
0/1/2
Set a value larger
than 128 to
increase the
density.
Set a value
smaller than 128
to decrease the
density.
0 to 255 128
M(Magenta)
05-8034
0/1/2
C(Cyan)
05-8035
0/1/2
Green
Y(Yellow)
05-8036
0/1/2
M(Magenta)
05-8037
0/1/2
C(Cyan)
05-8038
0/1/2
Blue
Y(Yellow)
05-8039
0/1/2
M(Magenta)
05-8040
0/1/2
C(Cyan)
05-8041
0/1/2
Cyan
Y(Yellow)
05-8024
0/1/2
M(Magenta)
05-8025
0/1/2
C(Cyan)
05-8026
0/1/2
Magenta
Y(Yellow)
05-8027
0/1/2
M(Magenta)
05-8028
0/1/2
C(Cyan)
05-8029
0/1/2
Yellow
Y(Yellow)
05-8030
0/1/2
M(Magenta)
05-8031
0/1/2
C(Cyan)
05-8032
0/1/2
Red/Green/
Blue/Cyan/
Magenta/
Yellow
K(Black) 05-8023 0/1/2
* Set the value in increments of approximately 20, while checking the printouts until the optimum value is
obtained.