Toshiba HX7+ ASD - Page 69

60 HX7+ ASD Installation and Operation Manual
EOI O PTION S ETUPS
(keypad)
Alarm Popups (check box)
Over-Current Alarm N/A
ASD Overload Alarm N/A
Motor Overload Alarm N/A
Timer N/A
Over-Torque Alarm N/A
DBR Resistor Alarm N/A
Lockout (check box)
Lockout Reset N/A
Lockout Monitor N/A
Lockout Run/Stop N/A
Lockout Parameter Access N/A
Lockout Parameter Write N/A
Lockout Frequency Change N/A
Lockout Options N/A
Lockout Local|Remote N/A
Password (Enable/Enter) N/A
Review Startup Screen
(displays the Startup screen) N/A
U TILITY P ARAMETERS
Versions (read only)
Typeform N/A
CPU Version N/A
CPU Revision N/A
EEPROM #1 Version N/A
EEPROM #2 Version N/A
EOI Version (keypad) N/A
Display Units
User-defined Units (check box) N/A
User-defined Units N/A
Hz Per User-defined Unit F702
Frequency Display Resolution F703
Units for Voltage and Current F701
Type Reset
None
F007
Auto Setup for 50 Hz
Auto Setup for 60 Hz
Restore Factory Defaults
Clear Trip
Clear Run Timer
New Base Drive Board
Save User Parameters
Restore User Parameters
Reload EOI Flash (keypad)
Reset EOI Memory (keypad)
Comm. Stops During Reset
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number