Toshiba PORTEGE Z930 - In the Case of FAIL

Tests and Diagnostics
PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887) [CONFIDENTIAL] 3-117
■ In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on
the WinPE T&D screen.
The detail of the error is printed to the log of WinPE T&D. Move details are as shown below.
Message Explanation Remarks
Read Hdd Create File
Error.Address=XX
Failed in opening of HDD
driver.
XX is LAB value.
The HDD driver may not
be normal or installed.
Read Hdd Set File
Pointer Error.Address=XX
Failed in the HDD file
pointer setting command.
XX is LAB value.
It indicates that a read
erroroccurred with the
specified value
Read Hdd Command
Error.Address=XX
Failed in the HDD read
command.
XX is LAB value.
Read Hdd Check Size Error
Address=XX
The size read by the HDD
read command does not
correspond to the specified
size.
XX is LAB value.