Toshiba PORTEGE Z930 - 4.8 Fin

4 Replacement Procedures
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) [CONFIDENTIAL] 4-31
4.8 Fin
Removing the Fin
To remove the fin, follow the steps below and refer to Figure 4-14.
1. Remove the following screws and fin.
 M23.5C BIND 2
NOTE: When removing the fin, be sure to remove the screws in the reverse order of the
number marked on the fin.
Figure 4-14 Removing the fin
M2x3.5C BIND
Fin