Toshiba PORTEGE Z930 - DC Power Supply (AC Adapter); Error Code

Troubleshooting Procedures
2-16 PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887) [CONFIDENTIAL]
Check 1 Convert the DC IN icon blink pattern into the hexadecimal error code and compare
it to the tables below. Then go to Check 2.
Table 2-3 Error code
Error code Where error occurs
1*h DC Power (AC Adapter)
2*h Main battery
3:h 2nd battery
4*h S3V output
5*h A0-E5V output
6*h A0-E3V output
7*h 1R5-B1V output
8*h PPV output
9*h
－
A*h IGD-PGV output
B*h
－
C*h VCCSA_P0V output
D*h PTV output
E*h -
F*h -
 DC power supply (AC adapter)
Error code Meaning
10h AC Adapter output voltage is over 20.92V.
11h Common Dock output voltage is over 20.92V...
12h Current from the DC power supply is over 3.89A.
13h Current from the DC power supply is over 0.5A when there is no load.
14h The compensation value of [0A] is not within the limits from design data (±
481mA).