4 Replacement Procedures
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) [CONFIDENTIAL] 4-51
4.13 Cover assembly/LCD assembly
Removing the Cover assembly/LCD assembly
To remove the cover assembly/LCD assembly, follow the steps below and refer to Figure 4-
23 to 4-25.
1. Peel off the insulator (INSU ANT HLD) to release the wireless LAN antenna cable
(black).(3G model only )
Figure 4-23 Removing the cover assembly/LCD assembly (1)
Insulator
(INSU ANT HLD)
Wireless LAN antenna cable (black)
To Next Page
Loading...
