Toshiba PORTEGE Z930 - Page 335

4 Replacement Procedures
4-52 [CONFIDENTIAL] PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
2. Release the latches and remove the hinge caps.
3. Remove the following screw and D SUB cover.
 M23B S-THIN HEAD 1
4. Remove the following screws securing the cover assembly and LCD assembly.
 M2.53C S-THIN HEAD 4
Figure 4-24 Removing the cover assembly/LCD assembly (2)
M2x3B S-THIN HEAD
Hinge cap L
Hinge cap R
D SUB cover
M2.5x3C S-THIN HEAD
M2.5x3C S-THIN HEAD
Latch
Latch