Toshiba PORTEGE Z930 - 4.5 SSD

4 Replacement Procedures
4-20 [CONFIDENTIAL] PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
4.5 SSD
CAUTION: Take care not to press on the top or bottom of the SSD. Pressure may cause
data loss or damage to the device.
Removing the SSD
To remove the SSD, follow the steps below and refer to Figure 4-7.
1. Remove the following screws and disconnect the SSD from the connector CN1910
on the system board.
 M23.5C BIND 2
Figure 4-7 Removing the SSD
M2x3.5C BIND
SSD
CN1910