4 Replacement Procedures
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) [CONFIDENTIAL] 4-15
6. Disconnect the battery harness from the connector CN8110 on the system board.
7. Remove the following screws and the battery pack.
M2.55C FLAT HEAD screw 6 (Described as “5” in the figure)
CAUTION: When removing the battery pack, do not drop the screws on the computer.
Figure 4-5 Removing the battery pack (2)
NOTE: Dispose of used batteries according to the laws and ordinances of your local
authority.
Battery pack
CN8110
Battery harness
5
5
5
5
5
5
To Next Page
Loading...
