Toshiba PORTEGE Z930 - Page 318

4 Replacement Procedures
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) [CONFIDENTIAL] 4-35
3. Take out the DC-IN harness from the slot of the cover assembly and disconnect it
from the connector CN8800 on the system board.
4. Turn up the insulator (INSU W-LAN) and remove the following screw.
 M23B S-THIN HEAD 1
5. Remove the following screw and the system board.
 M23B S-THIN HEAD 1
6. Disconnect the wireless LAN card from the connector CN2600 on the system board.
Figure 4-16 Removing the system board (2)
M2x3B S-THIN HEAD
M2x3B S-THIN HEAD
System board
DC-IN harness
Wireless LAN card
Insulator
(INSU W-LAN)
CN2600
CN8800