Strata CTX670 Installation
Install Reserve Power
Strata CTX I&M 10/02 3-35
Strata CTX670
Installation
Figure 3-19 CTX670 Cabinet Floor Installation
Important!
• BFIF (two-each) and RWBFA (six-each) are supplied with the floor installation kit BFIF.
• Upper and third cabinets must be fixed to the wall with RWBFS on each side (use #12 x 2 inch
wood screws and wall anchors, as required).
• Floor fixture (BFIF) must be fixed to floor by either anchor bolts, or wall by RWBF wall
brackets (see Figures 3-19 and 3-20).
A
B
Front (2)
Mouting
Screws
Provided
with BFIF Kit
Top Cabinet Wall
Securing Brackets
(RWBF)
(Left and
Right Side)
Back (2) Mounting
Screws Provided
with BFIF Kit
B
B
B
B
Bottom Wall
Securing Bracket
(RWBF)
Third Cabinet Wall
Securing Bracket
(RWBF)
(Left and right side)
B
B
A
A
A
B
BFIF
Mounting
Screws
Base Cabinet
(bottom)
BFIF is
inside of
cabinet edge
BFIF
Mounting Screws
Floor
Fixture
(BFIF)
Anchor
Bolts (2)
Anchor
Bolts (2)
5042
B
A
A
A
B
B
1
To Next Page
Loading...
