Peripheral Installation
Station Message Detail Recording (SMDR)
9-30 Strata CTX I&M 10/02
Record Formats (Release 1.03)
Table 9-4 SMDR Record Format (Software Release 1.03)
Line Column Name Format Notes
1
1(1) Record Type “N”/”S”/”X”/”E”/”B”/
”I”/”T”/”A”/”C”/”M”
See “SMDR Record Types” on page 9-27.
2(1) Space
3-5(3) Record Number XXX Record Number (000 -- 127)
6(1) Space
7-12(6) Node number XX 00 - 99
13(1) Space
14-22(9) Orig Information “DN”+XXXXX
“CF”+ XXXXX
“T”+OLG+MMM+NN
“T”+ILG+MMM+NN
“A”+OLG+MMM+NN
“A”+ILG+MMM+NN
Prime DN
X=ID of conference
“T”/”A”:Answersupervised/Unsupervised
ILG: Incoming Line Group
OLG: Outgoing Line Group
MMM: CO number/Channel Group No.
NN: ISDN-Bch if caller seizes non-ISDN
trunk, then “QQ” is shown as NN value.
(Left positioned and padded space)
23(1) Space
24-32(9) Term Information
33(1) Space
34-47(14) Time stamp MO/DD HH:MM:SS N/E Record: End of Call
S Record:Start of Call
If 911, time trunk is seized.
X Record: Completion of transfer
B Record: The call is abandoned
I Record: System initialized
T Record: Original/New system time
A/C/M Record: Input account code
MO = Month(01 -- 12)
DD = Day (00 -- 31)
HH = Hour (00 -- 23)
MM = Minutes 00 -- 59)
SS = Seconds (00 -- 59)
48(1) Space
49-58(10) Call duration HH:MM:SS.S HH = Hour (00 -- 23)
MM = Minutes (00 -- 59)
SS = Seconds (00 -- 59)
S = always 0
59(1) Space
60-91(32) Dial information XX….X Dials/Account Codes
(Left positioned and padded space)
To Next Page
Loading...
