Strata CTX100 Installation
Installing the CTX100 Cabinet
2-8 Strata CTX I&M 10/02
Figure 2-5 Cabinet Wall Mounting
Figure 2-6 Mounting CTX100 Cabinet on Back Cover
10. Ground the system according to “AC Power and Grounding Requirements” on page 2-4.
11. Go to “Step 8: Set Jumpers and Install Option PCBs onto the ACTU” on page 2-18.
Screw A
Flange
Hook
Hook
Flange
Base
Expansion
Stud
Plaster
Board
Back Board
(1/2 Inch
Plywood)
5912
Base
Expansion
Hanger
Back Cover
Bottom left
hanger is only
used on the
Base Cabinet
Hanger Hole
Mount Cabinet - Slid
e
left
Unmount Cabinet - Slide
right and up
5937
To Next Page
Loading...
