3 Tests and Diagnostics 3.31 SETUP
3-96 TECRA M3 Maintenance Manual (960-507)
CPU Sleep Mode
Use this option to enable or disable the CPU sleep function.
Enabled Enables sleep mode. (Default)
Disabled Disables sleep mode.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright Full brightness for maximum visibility.
Bright Full brightness for high visibility.
Semi-Bright Less than full brightness for saving power.
Cooling Method
If the CPU becomes too hot, the fan turns on or the processing speed is lowered
automatically. When the CPU temperature falls to a normal range, the fan turns off.
Maximum performance Turns on fan first, then if necessary lowers CPU
processing speed.
Battery optimized Lowers the CPU processing speed first, then if
necessary turns on the fan.
4. Password
This option allows you to set or reset the user password for power on.
Not Registered Change or remove the password. (Default)
For details on setting the user password, refer to the User’s Manual.
5. HDD Password
This option sets HDD password. HDD password is a security function to protect the built-
in HDD.
(a) HDD
This item selects the hard disk to set HDD password.
Built-in HDD Sets HDD password for the built-in HDD (Default)
Second HDD Sets HDD password for the second HDD
To Next Page
Loading...
