3.31 SETUP 3 Tests and Diagnostics
TECRA M3 Maintenance Manual (960-507) 3-97
(b) HDD Password Mode
This item registers HDD password and can be selected only for registering HDD
password. To change HDD Password Mode when HDD password is registered,
delete the registered HDD password first, and then register new password.
User Only Sets only User HDD Password (Default)
Master+User Sets Master HDD Password and User HDD Password
(c) User Password
This item sets User password.
For details on setting user password, refer to the User’s Manual.
(d) Master Password
This item sets the Master HDD password.
This can be set Master+User is set in the HDD password Mode. For details, refer
to the User’s Manual.
6. Boot Priority
This tab sets the priority for booting the computer and the priority for the built-in HDD or
optional secondary HDD.
(a) Boot Priority
HDD? FDD? CD-ROM? LAN: The computer looks for bootable files
in the following order: HDD, FDD, CD-
ROM and LAN. (Default)
FDD? HDD? CD-ROM? LAN: The computer looks for bootable files
in the following order: FDD, HDD, CD-
ROM and LAN.
HDD? CD-ROM? LAN? FDD: The computer looks for bootable files
in the following order: HDD, CD-ROM,
LAN and FDD.
FDD? CD-ROM? LAN? HDD: The computer looks for bootable files
in the following order: FDD, CD-ROM,
LAN and HDD.
CD-ROM? LAN? HDD? FDD: The computer looks for bootable files
in the following order: CD-ROM, LAN,
HDD and FDD.
CD-ROM? LAN? FDD? HDD: The computer looks for bootable files
in the following order: CD-ROM, LAN,
FDD and HDD.
To Next Page
Loading...
