3 Tests and Diagnostics 3.31 SETUP
3-98 TECRA M3 Maintenance Manual (960-507)
NOTE: CD-ROM refers to also a DVD-ROM, CD-RW/DVD, DVD±R/±RW or DVD Super
Multi drive.
(b) HDD Priority
This option enables to select the priority for the Built-in HDD, optional second
HDD.
Built-in HDD? Second HDD (Default)
Second HDD? Built-in HDD
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to PRL protocol.
7. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external monitor for
simultaneous display.
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.
To Next Page
Loading...
