3.31 SETUP 3 Tests and Diagnostics
TECRA M3 Maintenance Manual (960-507) 3-101
(f) Language During Bootup
This option selects the language during bootup. This message appears only on the
model for TCL(Canada).
English The message is displayed in English. (Default)
French The message is displayed in French.
9. Configuration
This option displays the configuration method.
(a) Device Config.
The devices are initialized when the PNP OS loads.
Setup by OS First, devices necessary for loading the OS will be
initialized. After the PNP OS loads, the OS will initialize
other devices. In this case, setup of PC Cards will be fixed
to “Auto-Selected” and cannot be changed. (Default)
All Devices All devices will be initialized.
If you are using an OS that does not have PNP capacity, select “All Devices.”
The Display shows the following message:
Device Config. = All Devices
To Next Page
Loading...
