3 Tests and Diagnostics 3.31 SETUP
3-104 TECRA M3 Maintenance Manual (960-507)
13. Security controller
TPM
Disables the security controller called TPM (Trusted Platform Module).
When the cursor is on the Enable (Disable) and the Space is pressed, message is
displayed and the PC waits Y or N key input by the user.
When Y is pressed, it is sets to Enable (Disable). After changing, the cursor could
not be moved on the TPM tem.
Clear TPM Owner
This is not displayed when the TPM is set to Disabled. This is executed, when the
PC is disposed or the owner of the PC changes.
When the cursor is on this item and the Space is pressed, message is displayed
and the PC waits Y, E, S, and Enter key inputs by the user.
When Y, E, S, and Enter keys are pressed, the data is disposed.
After changing, the display of TPM item is changed to Disabled and this item
becomes not displayed and the cursor could not be moved on the TPM item.
14. Peripheral
Use this option to select the parallel port mode and hard disk mode.
(a) Internal Pointing Device
This option enables and disables the Touch Pad.
Enabled Enables the Touch Pad. (Default)
Disabled Disables the Touch Pad.
(b) Ext Keyboard “Fn”
Use this option to set the Fn key equivalent when you are using an external
keyboard. Selecting this option displays the following subwindow.
Enabled Enables the feature.
Use this option to set a key combination on an external keyboard to emulate the Fn
key on the computer's internal keyboard. Setting a Fn key equivalent will enable
you to use “Hotkeys” by pressing the set combination in place of the Fn key. The
following items can be selected for this option:
Left Ctrl + Left Alt*
Right Ctrl + Right Alt*
Left Alt + Left Shift
Ext Keyboard "Fn" key equivalent
= Left Ctrl + Left Alt
To Next Page
Loading...
