4.24 Microphone / Wireless LAN antenna / Bluetooth antenna 4 Replacement Procedures
TECRA M3 Maintenance Manual (960-507) 4-79
4. Remove the ten acetate tapes securing the wireless LAN antenna cables and Bluetooth
antenna cable (for wireless LAN/Bluetooth models only).
5. Peel off the wireless LAN antennas and Bluetooth antenna from the display cover.
6. Remove these antennas from the guides and pull them from the hole of the display cover.
Figure 4-53 Removing the wireless LAN/Bluetooth antenna
Acetate tape
Acetate tape
Wireless LAN antenna
Wireless LAN antenna
Bluetooth antenna
To Next Page
Loading...
