4.25 Hinge 4 Replacement Procedures
TECRA M3 Maintenance Manual (960-507) 4-83
3. Remove the two mask seals and the following screws of the LCD cover.
? M2.5?2.8B FLAT HEAD screw ?2
4. Remove the following screws securing the hinges on the LCD cover.
? M2.5?5B FLAT HEAD screw ?2
Figure 4-56 Removing the hinge (1)
Hinge
Mask seal
Mask seal
M2.5?2.8B FLAT HEAD
M2.5?2.8B FLAT HEAD
M2.5?5B FLAT HEAD
M2.5?5B FLAT HEAD
To Next Page
Loading...
