Toshiba Tecra M3 - Page 329

4 Replacement Procedures 4.25 Hinge
4-84 TECRA M3 Maintenance Manual (960-507)
5. Remove the following screws securing the hinges at the back and remove the hinges while
turning them.
? M2.5?6 Tapping screw ?2
Figure 4-57 Removing the hinge (2)
6. Pull out the LCD cable from the hole.
M2.5?6 Tapping
M2.5?6 Tapping
Hinge
Hinge
LCD cable