4 Replacement Procedure 4.26 Fluorescent Lamp
4-102 TECRA M3 Maintenance Manual (960-507)
Assembling Fluorescent lamp
Checking the backlight
1. Check the following items according to Figure 4-74.
Figure 4-74 Replacing TMD fluorescent lamp (XGA) (6)
The sheet must not be
dislocated from the frame
The sheet must not be
dislocated from the frame
The sheet must not be
dislocated from the frame
The frame must not be overlaid
with the prism sheet, etc.
The frame must not be overlaid
with the prism sheet, etc.
The frame must not be overlaid
with the prism sheet, etc.
To Next Page
Loading...
