4 Replacement Procedure 4.26 Fluorescent Lamp
4-108 TECRA M3 Maintenance Manual (960-507)
4.26.3 Replacing the 14.1-inch SXGA+ Samsung Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel. Be careful not to let dust or
other foreign substance into the module.
To replace the 14.1-inch SXGA+ Samsung fluorescent lamp, follow the steps below and refer to
figures4-80 to 4-85.
1. Remove the PCB cover and CFO cover.
CAUTION: Handle with care not to damage COF of S/D and G/D ICs.
Figure 4-80 Replacing Samsung fluorescent lamp (SXGA+) (1)
To Next Page
Loading...
