EasyManuals Logo

Toshiba TOSDIC-CIE DS User Manual

Toshiba TOSDIC-CIE DS
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Safety Precautions
ii
1. Safety Precautions for Installation
WARNING
Grounding required:
To avoid the risk of electric shock or fire, be sure to ground the equipment.
CAUTION
Choose proper environment for installation:
Avoid installing and storing the equipment in the following environments:
Location with considerable dust
Location in which flammable or corrosive gases (such as SO2 and H2S) are present
Location where vibration or shock exceeds allowable limits
Location where condensation may occur due to rapid change in temperature
Location where the temperature is not within the specified range for installation
Location where the humidity exceeds the specified limits for installation
Location in the direct sunlight
Location near a device that generates strong radio waves or magnetic fields
Considerations for maintenance and inspection:
Install the equipment in a place that facilitates maintenance and inspection. If not, in case of malfunctioning, it
may hinder the recovery of the system and result in serious accident.
Ensure proper ventilation:
Do not block vents, intake or exhaust openings of the equipment. Blocking them may cause mulfunctioning or
overheating which may result in fire.
Prohibit excessive voltage or current:
Avoid applying excessive voltage and current across the input/output terminals by keeping them within the
specified ratings. Otherwise it may result in equipment damage.
Avoid noise interference:
Place I/O and data transmission signal cables away from the power cables and the devices that generate
magnetic or electromagnetic fields. Interference noise may cause the equipment to malfunction.
Turn off power before installing modules:
Turn off the power before installing modules.Otherwise,it may result in electric shock or module failure.
Emergency stop circuit and interlock circuit:
Construct the emergency stop circuit and interlock circuit outside the equipment.
Otherwise, it may cause an injury accident or damage to the machine if failure or malfunction occurs
in the equipment.

Table of Contents

Other manuals for Toshiba TOSDIC-CIE DS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba TOSDIC-CIE DS and is the answer not in the manual?

Toshiba TOSDIC-CIE DS Specifications

General IconGeneral
BrandToshiba
ModelTOSDIC-CIE DS
CategoryControl Systems
LanguageEnglish

Related product manuals