E6581386
F-46
6
2) S-pattern acceleration/deceleration 1
Select this pattern to accelerate/decelerate the motor rapidly to a high-speed region with an output frequency of
60Hz or more or to minimize the shocks applied during acceleration/deceleration. This pattern is suitable for
conveyer machines.
Actual acceleration time
× 10%
× 10%
Time [s]
Output frequency [Hz]
0
Maximum frequency
Set frequency
Actual deceleration time
Maximum frequency
Set frequency
× 10%
× 10%
Time [s]
Output frequency [Hz]
0
3) S-pattern acceleration/deceleration 2
Select this pattern to obtain slow acceleration in a demagnetizing region with a small motor acceleration torque.
This pattern is suitable for high-speed spindle operation.
Set frequency
ctual acceleration time
Output frequency [Hz]
Time [s]
0
Base frequency
Set frequency
ctual deceleration time
Output frequency [Hz]
Time [s]
0
Base frequency
Maximum frequency
Maximum frequency
To Next Page
Loading...
