Toshiba TOSVERT VF-PS1 - Page 215

E6581386
H-7
8
[Setup values of monitor indication parameters (~)]
Communication
No.
Default
setting
Item displayed Marking Unit (Panel)
Unit
(Communication)
FD00  Output frequency  0.1Hz [note 4] 0.01Hz
FE02  Frequency command value  0.1Hz [note 4] 0.01Hz
FE03  Output current  1% or  0.01%
FE04  Input voltage (DC detection)  1% or  0.01%
FE05  Output voltage  1% or  0.01%
FE15  Compensated frequency  0.1Hz [note 4] 0.01Hz
FE16  Speed feedback (real-time value)  0.1Hz [note 4] 0.01Hz
FE17  Speed feedback (1-second filter)  0.1Hz [note 4] 0.01Hz
FE18  Torque  1% 0.01%
FE19  Torque command  1% 0.01%
FE20  Torque current  1% 0.01%
FE21  Exciting current  1% 0.01%
FE22  PID feedback value  0.1Hz [note 4] 0.01Hz
FE23  Motor overload factor (OL2 data)  1% 0.01%
FE24  Inverter overload factor (OL1 data)  1% 0.01%
FE25 
Regenerative braking resistance
overload factor (OLr data)
 1% 1%
FE28 
Regenerative braking resistance load
factor (% ED)
 1% 1%
FE29  Input power k 0.1kW 0.01kW
FE30  Output power  0.1kW 0.01kW
FE39  Optional AI2 input  1% 0.01%
FE35  RR/S4 input  1% 0.01%
FE36  VI/II input  1% 0.01%
FE37  RX input  1% 0.01%
FE38  Optional AI1 input  1% 0.01%
FE40  FM output  1 0.01
FE41  AM output  1 0.01
(FA65)  Communication data output [Note 3] [Note 3] [Note 3]
FE66 
Attached to expansion I/O card 1 CPU
version
 - -
FE67 
Attached to expansion I/O card 2 CPU
version
 - -
FE76  Integral input power k  Depends on 
Depends on

FE77  Integral output power  Depends on 
Depends on

FE00  Signed output frequency  0.1Hz [note 4] 0.01Hz
FE02  Signed frequency command value  0.1Hz [note 4] 0.01Hz
FE15  Signed compensated frequency  0.1Hz [note 4] 0.01Hz
FE16  Signed speed feedback (real-time value)  0.1Hz [note 4] 0.01Hz
FE17  Signed speed feedback (1-second filter)  0.1Hz [note 4] 0.01Hz
FE18  Signed torque  1% 0.01%
FE19  Signed torque command  1% 0.01%
FE20  Signed torque current  1% 0.01%
FE22  Signed PID feedback value  0.1Hz [note 4] 0.01Hz
FE37  Signed RX input  1% 0.01%
FE38  Signed optional AI2 input  1% 0.01%
FE71  Rated voltage  1 0.1
FE90  Rotational speed  1min
-1
1min
-1
FA15 
Communication option
Reception counter
 1 1
FA16 
Communication option
Error counter
 1 1
FE43  MON1  1% 0.01%
FE44  MON2  1% 0.01%
FE56  RP  0.1% 0.01%
(Continued overleaf)
[
Note 5]
[
Note 5]
[
Note 5]
[Note 5]
[
Note 5]
[
Note 5]
[
Note 2,5]
[
Note 2,5]
[
Note 2,5]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 2]
[
Note 5]