1. UNPACKING
SPAA-214-R1
1.3 POWER CORD
1-2
1.3 POWER CORD
As the power cord is not supplied with this printer, locally purchase the power cord which meets the
following standard.
For USA and Canada:
Power Supply Cord – UL and CSA approved, type SVT, 18/3AWG, rated min. 125V, 10A
Attached Plug and Appliance Coupler – UL and CSA approved, molded on type.
The plug is parallel-blade grounding type, NEMA 5-15P configuration. The appliance coupler is Female
configuration.
Both attachment plug and appliance coupler are rated minimum 125V, 10A.
For European countries:
Power Supply Cord – HAR or domestic approved where the equipment is used,
Type H05VV-F, rated minimum 250V, 10A
Attachment Plug and Appliance Coupler – Domestic approved where the equipment is used, molded on
type, having grounding terminal rated minimum 250V, 10A. The appliance coupler is Female
configuration.
For the other countries:
Domestic approved, having suitable electrical ratings and characteristics for the end-product
specifications and use.
The table below shows the sample of domestic safety approval markings.
Major safety approval marking (as of June, 2003)
To Next Page
Loading...
