Toshiba TRST-A15 SERIES Maintenance Manual

7.PERIODIC MAINTENANCE SPAA-214-R1
7.1 PERIODIC MAINTENANCE PROCEDURE
7-1
7. PERIODIC MAINTENANCE
To retain the quality and performance of this machine and to prevent unexpected troubles, the
following maintenance should be performed periodically.
7.1 PERIODIC MAINTENANCE PROCEDUE
Be sure to perform the following cleaning and checks every six months.
No. Check item Procedure/check point Required tool
1 Appearance check Visually check the outside of the unit for
any deformation, cracks, clearance, or
bend.
-----
2 Cleaning the covers Wipe the covers with a soft dry cloth or
soft cloth slightly moistened with mild
detergent. After using detergent for
cleaning, be sure to wipe it off with a
moistened cloth.
Soft dry cloth or soft
cloth slightly
moistened with mild
detergent
3 Cleaning the print
head
Clean the print head with a cotton swab
slightly
moistened with alcohol.
Cotton swab slightly
moistened with
alcohol.
4 Cleaning the cutter
and sensors
Remove any dust and paper particles
from the cutter, and from the sensors
with an air blower or a brush.
• Air blower
• Brush
5 Cleaning the inside
of the printer
Remove any dust or paper particles from
the inside of the printer with an air blower
or a brush.
• Air blower
• Brush
6 Platen check Check if the platen is stained or
damaged.
-----
7 Print check Perform a print quality test with the self
test print.
Refer to Page 5-1

Toshiba TRST-A15 SERIES Specifications

General

Brand	Toshiba
Model	TRST-A15 SERIES
Category	Printer
Language	English