2. INSTALLATION PROCEDURE
SPAA-214-R1
2.1 CONNECTING THE TRST-A15 TO THE POS TERMINAL
2-1
2. INSTALLATION PROCEDURE
WARNING!
1. Turn the POS terminal OFF before connecting the TRST-A15 printer.
2. Plug the TRST-A15 power cord into the AC outlet on the wall for power supply. Do not obtain the
AC power from the AC outlet of the POS terminal such as ST-A10, ST-7000, etc., because the
rush current at the TRST-A15 power on may exceed the rating of the power switch of the POS
terminal. Failure to do this may shorten the life of the power switch of the POS terminal.
2.1 CONNECTING THE TRST-A15 TO THE POS TERMINAL
CAUTION!
1. Use a locally purchased power cord which meets the standard.
2. Firmly plug the AC adapter cable and the power cord.
1. Turn the printer power OFF.
2. Insert the power cord into the AC inlet.
Power Cord
To Next Page
Loading...
Need help?
General