Toyota Prius+ - Intrusion Sensor; Canceling the Intrusion Sensor; Deactivating or Stopping the Alarm

151
1-7. Theft deterrent system
1
Before driving
PRIUS +_OM_OM47821E_(EE)
Intrusion sensor (if equipped)
The intrusion sensor detects intruders or movement in the vehicle.
When an intruder or movement is detected, the alarm will be trig-
gered.
The intrusion sensor can be canceled using the cancel switch.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
 Canceling the intrusion sensor
Turn the “POWER” switch off
and press the intrusion sensor
cancel switch.
Pressing the switch again will re-
enable the intrusion sensor.
The intrusion sensor will revert to
on each time the “POWER”
switch is turned to ON mode.
 Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
 Unlock the doors using the entry function or wireless remote
control.
 Start the hybrid system. (The alarm will be deactivated or
stopped after a few seconds.)