259
2-2. Instrument cluster
2
When driving
PRIUS +_OM_OM47821E_(EE)
Press the display position adjust-
ment switch to select ON or OFF.
Press and hold the “SET” switch.
System check display
After switching the “POWER” switch to ON mode, “welcome to PRIUS +” is
displayed while system operation is checked. When the system check is
complete, the normal screen will return.
When driving on snowy roads or in other bright environments
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding “” on the brightness control
button.
Pressing “” on the brightness control button or turning the “POWER” switch
off will cause the brightness level to revert to the original level.
Head-up display
The head-up display may seem dark and hard to see when viewed
through sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the head-up display is turned off, it will remain off even if the power
switch is turned to ON mode after the power switch has been turned off.
When the 12-volt battery is disconnected
The head-up display settings will be reset.
To Next Page
Loading...
Need help?
General
