Toyota Prius+ - Replacing the Following Bulbs; LED Lights; Condensation Build-Up on the Inside of the Lens

456
4-3. Do-it-yourself maintenance
PRIUS +_OM_OM47821E_(EE)
 Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
 Headlight low beams (LED type)
 Stop lights
 Tail lights
 Side turn signal lights
 High mounted stoplight
 Daytime running lights
 LED lights
The headlight low beams (LED type), stop lights, tail lights, high mounted
stoplight and daytime running lights consist of a number of LEDs. If any of
the LEDs burn out, take your vehicle to any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional to have the
light replaced.
 Condensation build-up on the inside of the lens
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
 Large drops of water have built up on the inside of the lens.
 Water has built up inside the headlight.
 When replacing light bulbs
P. 443