5
503
5-2. Steps to take in an emergency
When trouble arises
PRIUS +_OM_OM47821E_(EE)
Attach the 2 stickers as shown.
Remove any dirt and moisture
from the wheel before attaching
the sticker. If you are unable to
apply the stickers, inform the
nearest authorized Toyota dealer,
tire dealer or repairer, or another
duly qualified and equipped pro-
fessional that sealant has been
applied to the puncture when hav-
ing the tire repaired or replaced.
Connect the bottle to the com-
pressor.
As shown in the illustration, insert
the bottle vertically into the com-
pressor to connect making sure
that the claw on the bottle’s neck
is hooked onto the cutout of the
compressor case.